Visnode is a modular automotive data platform built around OEM+ integration. A central Hub reads CAN bus data and external sensors, then distributes that data to vehicle-specific displays or sends processed analog inputs to your ECU over CAN.
01
FLEXIBLE I/O
Connect a wide range of 5V sensors with 10 voltage-based inputs and 4 resistance-based inputs. Built-in CAN support lets the Hub read, process, and share vehicle data.
02
EXTERNAL DEVICES
Connect up to 3 supported devices. The Hub automatically sends each device the data it needs for a clean, plug n play setup.
03
CONFIGURABLE ROUTING
Configure, calibrate, and route each signal to your connected displays or send it to your ECU over CAN.
Connect to the hub over WiFi using your computer or phone.
Calibration tables or by preset.
Custom decoding or by preset.
At the center of Visnode is the Visnode Hub — a data interface designed to collect, process, and distribute vehicle data.
The Hub can be used in two main ways:
The Hub can also be used as an expansion device for your ECU. Analog inputs such as temperature, pressure, or other sensor signals can be converted and transmitted over CAN, giving your ECU access to additional data without needing every sensor wired directly to the ECU.
The Hub can also be used as an expansion device for your ECU. Analog inputs such as temperature, pressure, or other sensor signals can be converted and transmitted over CAN, giving your ECU access to additional data without needing every sensor wired directly to the ECU.
Designed for OEM+ integration, Visnode displays blend naturally with your car’s interior. Clean, subtle, and purpose-built — not loud aftermarket gauges.
Visnode displays are developed for specific vehicle models, with each display designed to integrate cleanly into its intended interior. Support for additional models will be added over time as new displays are developed and released.
